Campbell-scientific CNR4 Net Radiometer Manuel d'utilisateur télécharger pdf (Page 12)

CNR4 Net Radiometer

6. Perform the fine leveling using the two spring-loaded leveling screws—

one on the front and the other on the back of the bracket.

7. Route the sensor cable to the instrument enclosure.

8. Use the UV-resistant cable ties included with the tripod or tower to secure

the cable to the vertical pipe or crossarm and tripod/tower.

4.3 Use SCWin to Program Datalogger and Generate Wiring

Diagram

The simplest method for programming the datalogger to measure the CNR4 is

to use Campbell Scientific’s SCWin Program Generator.

The SCWin example provided here uses the thermistor to

provide the temperature correction.

NOTE

1. Open Short Cut and click on New Program.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 63 64

Pas de commentaire

Campbell-scientific CNR4 Net Radiometer Manuel d'utilisateur Page 12