Campbell-scientific A100LK Anemometer Manuel d'utilisateur télécharger pdf (Page 8)

A100LK Anemometer

4. Quickstart

4.1 Step 1 — Mount the Sensor

To mount the sensor, refer to Figure 4-1 and do the following.

1. Mount a CM202, CM204, or CM206 crossarm to a tripod or tower.

2. Secure the CM220 Mount to the crossarm.

3. Place the 27739 30 in. pole in the bottom of the A100LK and tighten the

thumb screws.

4. Place the bottom of the 27739 pole in the CM220's u-bolt and tighten the

nuts.

5. Use a bubble level to ensure that the anemometer is level.

6. Route the sensor cable along the underside of the crossarm to the tripod or

tower, and to the instrument enclosure.

7. Secure the cable to the 27739 pole, crossarm, and tripod or tower using

cable ties.

Thumb screw

27739 pole

CM220

Crossarm

CM220 u-bolt

FIGURE 4-1. A100LK mounted to a crossarm via the CM220

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Pas de commentaire

Campbell-scientific A100LK Anemometer Manuel d'utilisateur Page 8