Campbell-scientific SC115 CS I/O 2G Flash Memory Drive with USB Interf Manuel d'utilisateur télécharger pdf (Page 9)

SC115 CS I/O 2G Flash Memory Drive with USB Interface

5.2 Communications Interface Function

As a communication device, the SC115 provides pass-through

communications.

6. Specifications

Features

• Portable 2-GB memory drive

• Shuttles data, OS, and program files or remains connected to

datalogger to augment memory

• Can be used as a CS I/O to USB communications interface

• Mean time between failure (MTBF): >1,000,000 hrs

• Sealed, over-moulded case. No serviceable parts.

Compatibility

Dataloggers: CR800 / 850

CR1000, CR3000

CR5000, CR9000X

Temperature

Operating: -25° to 50°C

Power requirement

Source: 12 Vdc from datalogger via SC12 cable,

or 5 Vdc through PC USB port

Load

Inactive: 200 µA

Active: 35 mA

Memory

Capacity: 2 GB

Media: Flash

Weight: 0.64 kg (0.14 lbs)

Dimensions: 105 x 43 x 21 mm (4.2 x 1.7 x 0.8 in)

7. Setup

A PC requires software drivers to support the SC115, and the datalogger

requires inclusion of specific code in its CRBasic program. In rare instances,

the SC115 may require a change to its default configuration through Campbell

Scientific’s Device Configuration Utility software v. 1.5 or higher

(DevConfig).

7.1 SC115 Settings (Optional)

The default SDC addressing in the SC115 is adequate for most applications.

For exceptional circumstances, the CS I/O SDC address can be altered using

the SC115 service in DevConfig v. 1.5 or higher (see Section 14.1, SDC

Addressing).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 29 30

Pas de commentaire

Campbell-scientific SC115 CS I/O 2G Flash Memory Drive with USB Interf Manuel d'utilisateur Page 9