Campbell-scientific SI-111 (IRR-P) Precision Infrared Radiometer Manuel d'utilisateur Page 1

SI-111 PrecisionInfrared RadiometerRevision: 7/13 Copyright © 2002-2013Campbell Scientific, Inc.,Apogee Instruments, Inc.

SI-111 Precision Infrared Radiometer 5.1 CR1000 Example Program This example CR1000 program measures the sensor every 5 seconds and outputs a sample

SI-111 Precision Infrared Radiometer 'Instruction to measure mV output of thermopile detector (red wire to 2H, black wire to 2L, clear ‘wire to

SI-111 Precision Infrared Radiometer ;{CR10X} *Table 1 Program 01: 1 Execution Interval (seconds) ;Instruction string to measure the resistance o

SI-111 Precision Infrared Radiometer 9: Z=X+F (P34) 1: 8 X Loc [ SB_Temp_K ] 2: -273.15 F 3: 9 Z Loc [ SB_Temp_C ] ;Instruction to

SI-111 Precision Infrared Radiometer ;Target temperature calculation based on m and b coefficients. 15: Z=F x 10^n (P30) 1: 0.4 F 2: 1 n, Ex

SI-111 Precision Infrared Radiometer *Table 2 Program 02: 0.0 Execution Interval (seconds) *Table 3 Subroutines End Program 6. Maintenance A pr

SI-111 Precision Infrared Radiometer 10

Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbel

Warranty “PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are warranted by Campbell Scientific, Inc. (“Campbell”) to be free from defects in materi

Assistance Products may not be returned without prior authorization. The following contact information is for US and international customers residing

Table of Contents PDF viewers: These page numbers refer to the printed version of this document. Use the PDF reader bookmarks tab for links to spec

SI-111 Precision Infrared Radiometer Prior to November 2008, the SI-111 was named the IRR-P. Only the name changed. NOTE 1. General Description The

SI-111 Precision Infrared Radiometer 3. Installation The field of view for infrared sensors is calculated based on the geometry of the sensor and len

SI-111 Precision Infrared Radiometer 4. Wiring Target Temperature: Red Differential High Black Differential Low Clear Analog Ground Sensor Body T